 |
TORS (Transformer Oil Regeneration System) |
 The Omega TORS (Transformer Oil Recycling System) is designed to treat the insulating oils used in high voltage transformers and switch-gears. It encompasses the latest technological innovations yielding extraordinary performance without sacrificing
environmental standards.
TORS systems are specifically designed to customer's specifications. A unique feature
of the TORS is the reactivation system of the activated media. The reactivation is accomplished without interrupting the purification/regeneration process.
 TORS may be used to treat oils "In situ" with live transformers, or in the plant. Define your need and Omega will supply a turnkey system as per your specifications.
The performance table below shows typical performance of a TORS System. Note that the TORS System exceeds ASTM Standards.
PERFORMANCES |
DESCRIPTION |
ASTM STANDARDS |
“TORS” EXPECTED RESULTS |
Gas
content |
D 2440 |
0.01 % per volume |
Color appearance |
D 1500 |
Clear (visual) |
Interfacil Tension (IFT) |
D 971 |
> 30 Dynes /cm |
Maximum
residual water |
D 1533 |
< 6 mg /kg (5 PPM Per Weight at 20 0 C) |
Dielectric
strength |
D 877 |
> 60KV at 2 mm & 0.5 KV/sec |
Dissipation
factor |
D 924 |
02 % tg (d) 20 0 C |
Neutralization value (acidity) |
D 974 |
< 0.05 mg KOH / g |
Suspended
solids |
|
< 250 particles per 20 ml |
Residual
gas (Air) |
ASTM – D 831 |
0.25 % per volume at 20 0 C |
NOTES:
- Entering oils – 100 PPM per weight water content & 12% per volume of air at 20 C. Acidity 0.2 mg /KOH/g
- 1 lb. of FE will reduce the acidity to accepted norms. (0.05 mgKOH/g of 5 gallons)
- 1 lb. of activated Alumina will reduce the acidity level to accepted norms. (0.05mgKOH/g of 20 gallons)
- 3000 lbs. of FE will treat 15 000 gallons of insulating oils before reactivation, based on oil entering at 0.2 mgKOH/g.
- 3000 lbs. of activated Alumina will reduce the acidity level to accepted norms of 60 000 gallons of insulating oil.
Available options
Many specific options are available on the TORS models.
Units are tailored to meet your requirements and integrate as seamlessly as possible into your production process. Contact Omega to discuss your specific needs or
to obtain more details on equipment specifications.
Contact us for more information
|
